Cel-Fi GO Boosts & Improve Mobile Phone Signal in Australia
Amplify 4G signal for Stationary (Building) and Mobile (Vehicle)
Amplify cellular 4G LTE signal at Home, Office and in the Vehicle.
Cel-Fi GO is unconditionally network safe, as it prevents interference with mobile operator networks.
Cel-Fi GO is authorised for use in nearly 100 countries by almost 200 mobile operators, Cel-Fi covers spaces no one has covered before.
Cel-Fi GO 4G Mobile Signal amplifier is installer friendly, provide optimal coverage and automatically adjust to changing network conditions. Solutions range from plug & play to enterprise level, but in each case provides the industry’s highest Max Gain.
Key Features
Telstra, OPTUS, Vodafone etc 3G and 4G compatible
Supports LTE B28, LTE/3G B5, LTE B3
Frequencies: 700 MHz, 850 MHz, 1800 MHz
Automatically selects the overall best frequency
Professional features: manual frequency selection
Controller App: CelFi WAVE App (Required to register the booster with ACMA) APP available for Apple & Android
Suitable for cars, trucks, mining, marine, RVs
Inline amplifier
Bluetooth WAVE App for iPhone, Android and computers
Enquire Online
Cel-Fi Stationary Installation
Cel-Fi Mobile Installation
Quick installation
An excellent result after installing a Cel-Fi Go Stationary kit with an outdoor LPDA antenna in Melbourne Victoria. With Cel-Fi’s easy installation our client was enjoying the benefits of Cel-Fi within 2 hours.
4G Signal improvements increased from 1 bar of signal inside, to 5 bars. On-site speed tests via the Cel-Fi LTE relay reached download speeds of 50mbps. Operating within concrete walls signal distributed very well up to a 25m radius.
Operating on all 3G and 4G frequencies in Australia and abroad, this high-grade antenna can be used in a range of residential, commercial, and industrial mobile broadband applications on any mobile network. This is the ideal external antenna for Cel-Fi repeater systems. The Blackhawk Wideband LPDA Antenna provides an ideal solution for 3G / 4G voice and data applications. With the rollout of new 3G and 4G frequencies such as 700 MHz 4GX and 2600 MHz 4G, traditional Yagi antennas just haven’t been able to keep up. LPDA antennas allow a single antenna to cover all frequencies with the high gain of a Yagi antenna that rural and remote areas demand. This one antenna can be used on any mobile phone network in Australia, in any area without worrying about compatibility.
A Log Periodic Dipole Antenna, or LPDA for short, is a clever antenna design that provides exceptionally wideband performance by phasing a series of elements together, much like an ordinary yagi but with each successive element of a smaller (or larger) length. The result of this clever engineering is an antenna that holds high gain, with good tuning, across the entire cellular frequency range.
SUPPORTED NETWORKS
Telstra, Aldi Mobile, Boost Mobile, Optus , Woolworths Connect etc
Usage: Building and Vehicle
-
Ideal as a vehicle booster
-
CEL-FI GO has two options available: a mobile kit that includes a 12V cigarette lighter style power adaptor, or a stationary kit that includes an AC adaptor
-
Once installed, CEL-FI GO intelligently and automatically senses and adapts to its environment — including operator network changes, or those caused by other nearby CEL-FI devices or boosters.
Improve high rise building coverage
-
This system is ideal for the development of multistory buildings and basement car park distributed antenna systems (DAS)
Relay your mobile phone service
Does your property or mine site have coverage available on geographic high points, but have no coverage in buildings?
- The Cel-Fi GO system can be designed to retransmit service down to your location. Our field technicians achieve coverage over 500m using a single GO and directional antenna, and over 2km using a second repeater.
Professional installation required – Buildings
- This is an active radio transmitter that requires the appropriate level of theoretical knowledge to install without causing self-interference and for it to operate at full strength. So while it’s possible to self install, we do not provide the Cel-Fi GO in a package or kit form, as every installation will be different.
Professional installation recommended for Vehicles
-
It is possible to self-install the Cel-Fi GO inside your vehicle, however, you must ensure the internal and external antennas are isolated
-
To achieve the appropriate levels of isolation, it’s generally recommended that the external antenna is mounted on your vehicle tray, 4WD lightbar/roofracks, rather than bullbar (i.e. isolated by the metal roof)
-
If installing on a bullbar, it’s important that the internal antenna is placed in a position that will have the most metal between the external antenna
-
Cel-Fi GO can cause interference to your vehicle electronic systems, so we strongly recommend professional installation to make sure you get the best from this product.
Need more information?
Improve Mobile Phone Signal
indoors OFFICE or HOME
Â
Clients will benefit from our technical proficiency and emphasis on customer service.
Book a Service
We Provide the Best Service in Industry​
Our service includes new telephone system installation and relocation of existing phone systems, supply and maintenance of spare parts, Upgrading of current business phone systems and stock a full range of spare phones for all systems.